masthead prod
citotoxic_safety_cabinets-cytofast-top

CytoFAST Top

CytoFAST Top Cytotoxic Safety Cabinets belong to the latest generation of laminar airflow systems manufactured by Faster, in which the choice of materials of construction of the highest quality guarantees conformity to the strictest safety standards.

CytoFAST Top are Cytotoxic Drug and Microbiological Safety Cabinets designed and built to performance requirements of the EN 12469:2000 and DIN 12980:2005-06 European Standards.

They are triple HEPA filter technology cabinet, with 100% of the air filtered via the main H14 HEPA/ULPA filter directly below the work surface and then 70% of the air re-circulated via the recirculating H14 HEPA/ULPA filter within the cabinet, whilst the remaining 30% is discharged through an exhaust H14 HEPA/ULPA filter.

CytoFAST Top have been designed to guarantee the product, personnel and environmental protection and they are primary suitable for applications such as: preparation and handling of cytotoxic drugs, preparation and manipulation of antineoplastic chemotherapeutics, preparation and manipulation of CMR drugs and any other agents likely to cause genetic alterations or synergetic activities with other materials.

Since CytoFAST Top meet also EN 12469 as for Class II Biohazard cabinets, they can be adopted also for a wide range of disciplines in applications such as: Microbiology, Virology, Haematology, Cell culture, Genetics, Handling of hazardous agents to human beings or animals.

The ambient air is drawn in from the slots at the stainless-steel base of the front opening and it then passes through the H14 HEPA/ULPA filter bank below work surface, from where it is drawn up and blown into the plenum of the re-circulating and exhaust fan.

The “bio-dynamic sealing system” of the negative pressure plenum ensures that all contaminated particles are kept inside the system and are automatically drawn to the plenum or pressure chamber to be captured by the main re-circulating and exhaust H 14 HEPA/ULPA filters.

The fan system assures that no part of the cabinet comes ever under positive contaminated pressure to the laboratory, thus protecting and preserving the environment and operating personnel from exposure to cytotoxic drug, CMR compounds and agents of bio-contamination.

70% of the filtered air is re-circulated (after passing through a H14 HEPA/ULPA filter) in an air cleanliness in Class ISO 3, according to ISO 14644-1 laminar flow pattern downwards into the work chamber and the remaining 30% is exhausted to atmosphere through another H14 HEPA/ULPA filter.

Best technical solution - cleanability first of all: Front stratified hinged safety glass, the frontal opening is set to 200 mm. The whole front of the safety cabinet can also be opened upwards as it is hinged on the top – in order to allow easy access for complete and effective cleaning and decontamination. Single piece work chamber in stainless steel AISI 304 designed to fulfill the requirements and pass the cleanibility test according to EN 12469:2000.

ECS® Eco Controling System: The new ECS® microprocessor employs the latest innovative methods of integrated management of all principal functions of ventilation and filtration - self-regulating all the main filtration and ventilation system components - compensating for declining pressure drops and restoring power balance. Combining the use of AC motor-blowers and certified low pressure-drop filters, the new ECS® controlling system optimize power consumption, reducing CO2 emissions into the environment.

Anti Bacterial Coating: Exclusive Dupont™ ALESTA® anti-bacterial “Ag+ cations-based solution”, capable to prevent microbial contamination of surfaces thereby inhibiting long term surface growth.

Easy handling and maintenance: CytoFAST Top can pass through standard 800 mm wide door openings thanks to the overall depth of just 785mm. All service operations are available from the front of the cabinet. All service operations are available from the front of the cabinet. Despite the overall height, CytoFAST Top have a demountable base stand of 255 mm. Without this stand the cabinet height is 1995 mm and can easily pass through doors of 2 meters height.

Automatic safety service connections for gas and vacuum and one electrical socket fitted as standard in each size model.

External structure in epoxy powder coated cold-rolled steel for excellent corrosion resistance to the attack by aggressive common chemicals. Alternatively special models with external structure made in AISI 304L stainless steel for superior cleanability are also available on demand.

Rear wall in stainless steel AISI 304 L, designed to conform to requirements and pass the “cleanability test” according to EN12469:2000.

Work surface in stainless steel AISI 316L in one piece (or by sections upon request) which are easily removable for carrying out routine cleaning and/or autoclaving sterilization procedures; closed or perforated on request.

Work chamber in single piece AISI 304 stainless steel for the best cleanibility.

Front window: Stratified hinged safety glass to give easy access to large items. It is provided with gas springs to keep it open during maintenance or sanitization operations.

Re-circulating and extractor fans: two centrifugal fans direct driven motor ( main and exhaust ), with protection factor IP-55, controlled by two automatic independent speed-flow rate regulators and microprocessor system to keep constant airflow, showing laminar flow and protection barrier work conditions.

Filtration: H14 HEPA/ULPA filters with an efficiency better than 99,995 % MPPS (EN-1822). Third bank of class H14 HEPA/ULPA filters with easy replace system is positioned beneath work surface built for handling cytotoxic drugs

Operation Condition: Air cleanliness in Class ISO 3 as per ISO:EN 14644-1.

The user-friendly practical keyboard and the rear-lit LCD will continuously display all required data keeping the user constantly informed of the cabinet conditions in operation, and in particular:

  • display of laminar airflow velocity and frontal air barrier velocity
  • display of inside and outside temperature
  • display of residual lifetime of HEPA/ULPA filters, UV Lamp and activated carbon filter (if fitted)
  • display of total number of hours of operation
  • display of saturation level of HEPA/ULPA filters.

Audio-visual alarms provided for:

  • out of range or incorrect laminar airflow velocity and frontal air barrier velocity
  • front window opened
  • clogging of HEPA/ULPA filters
  • end of life-cycle of UV lamp and saturation of activated carbon filter (if fitted)
  • blockage in the exhaust duct ( if fitted )
  • fan-motor malfunction
  • power failure

Lighting: fluorescent tubes in built-in housing, placed outside the contaminated area.

Aluminum front closure panel that ensures the sealing of the cabinet for sterilization/fumigation.

D.O.P.-DEHS inlet port for testing the HEPA/ULPA filters.

UV sterilizing lamp (optional) installed on the aluminum front closure panel complete two switch-off countdown timers, one variable on a 0-3 hours scale (1 minute steps), the other set to 3 fixed hours.

Direct Ducting: As standard supplied with 200 mm diameter collar on the top of the cabinet for optional direct ducting to facility exhaust system




Product Code Width [cm] Motor-blowers Pressure
CytoFAST Top 209 F00015500000 90 Double fan Negative

Technical sheet

Useful dimension (mm):: WxDxH: 885x580x660
Overall dimension [mm]: WxDxH: 1015x785*2245 (*)
Noise level (dbA): <57
Working Aperture (mm): 200
Exhaust flow rate (m3/h): 290
Lighting level (lux): >1000
Weight (kg): 250
Electrical data [230V - 50H] (**): 230 V - 50 Hz
(*) overall height can be reduced to 1995mm:
(**) different voltage/frequency available upon request:

Accessories

FX0000064600 - UV Lamp
FX0000064900 - Additional electrical socket
FX0000064710 - Additional Vacuum Tap
FX0000647200 - Additional Compressed Air Tap
FX0000647300 - Additional Nitrogen Tap
F74005003100 - Replacement of HEPA filter under the work surface with activated charcoal filter in CF Top 209, factory fitted.
FX0000064050 - Additional exhaust charcoal filter without collar
FX0000064020 - Additional exhaust HEPA filter without collar
FX0002124940 - Volt free contact
FX0002124800 - Anti-blowback valve
FX0000640700 - Exhaust thimble connection
FX0002124200 - Arm rests (couple)
FX0000054210 - Stainless steel bar for bags with 6 hooks for Top 209
CytoFAST Top 212 F00015600000 120 Double fan Negative

Technical sheet

Useful dimension (mm):: WxDxH: 1190x580x660
Overall dimension [mm]: WxDxH: 1320x785*2245
Noise level (dbA): <58
Working Aperture (mm): 200
Exhaust flow rate (m3/h): 390
Lighting level (lux): >1100
Weight (kg): 295
Electrical data [230V - 50H] (**): 230 V - 50 Hz
(**) different voltage/frequency available upon request:

Accessories

FX0000064600 - UV Lamp
FX0000064900 - Additional electrical socket
FX0000064710 - Additional Vacuum Tap
FX0000647200 - Additional Compressed Air Tap
FX0000647300 - Additional Nitrogen Tap
F74005003200 - Replacement of HEPA filters under the work surface with activated charcoal filters in CF Top 212, factory fitted
FX0000064050 - Additional exhaust charcoal filter without collar
FX0000064020 - Additional exhaust HEPA filter without collar
FX0002124940 - Volt free contact
FX0002124800 - Anti-blowback valve
FX0000640700 - Exhaust thimble connection
FX0002124200 - Arm rests (couple)
FX0000064210 - Stainless steel bar for bags with 6 hooks for Top 212
CytoFAST Top 215 F00015700000 150 Double fan Negative

Technical sheet

Useful dimension (mm):: WxDxH: 1495x580x660
Overall dimension [mm]: WxDxH: 1625x785*2245
Noise level (dbA): <59
Working Aperture (mm): 200
Exhaust flow rate (m3/h): 485
Lighting level (lux): >1200
Weight (kg): 380
Electrical data [230V - 50H] (**): 230 V - 50 Hz
(**) different voltage/frequency available upon request:

Accessories

FX0000064600 - UV Lamp
FX0000064900 - Additional electrical socket
FX0000064710 - Additional Vacuum Tap
FX0000647200 - Additional Compressed Air Tap
FX0000647300 - Additional Nitrogen Tap
F74005003250 - Replacement of HEPA filters under the work surface with activated charcoal filters in CF Top 215, factory fitted
FX0000064050 - Additional exhaust charcoal filter without collar
FX0000064020 - Additional exhaust HEPA filter without collar
FX0002124940 - Volt free contact
FX0002124800 - Anti-blowback valve
FX0000640700 - Exhaust thimble connection
FX0002124200 - Arm rests (couple)
FX0000074210 - Stainless steel bar for bags with 6 hooks for Top 215
CytoFAST Top 218 F00015800000 180 Double fan Negative

Technical sheet

Useful dimension (mm):: WxDxH: 1800x580x660
Overall dimension [mm]: WxDxH: 1930x785*2245
Noise level (dbA): <60
Working Aperture (mm): 200
Exhaust flow rate (m3/h): 585
Lighting level (lux): >1200
Weight (kg): 460
Electrical data [230V - 50H] (**): 230 V - 50 Hz
(**) different voltage/frequency available upon request:

Accessories

FX0000064600 - UV Lamp
FX0000064900 - Additional electrical socket
FX0000064710 - Additional Vacuum Tap
FX0000647200 - Additional Compressed Air Tap
FX0000647300 - Additional Nitrogen Tap
F74005003300 - Replacement of HEPA filters under the work surface with activated charcoal filters in CF Top 218, factory fitted.
FX0000064050 - Additional exhaust charcoal filter without collar
FX0000064020 - Additional exhaust HEPA filter without collar
FX0002124940 - Volt free contact
FX0002124800 - Anti-blowback valve
FX0000640700 - Exhaust thimble connection
FX0002124200 - Arm rests (couple)
FX0000084210 - Stainless steel bar for bags with 6 hooks for Top 218