The self-powered unit - by means of dry UPS battery - provides a laminar air flow of Class ISO 5 (NF, EN, ISO 14644-1) blown horizontally from the plenum towards the loading door, thus sweeping through the area where the products are stored (over the shelves and trays), maintaining a constant positive pressure within the transfer trolley, greater than the pressure in the surrounding area - thereby eliminating the possibility of any cross contamination.
Body structure fully made in stainless steel AISI 304L 4B (Scotch Brite finishing) press-bent metal sheets with radius of 3 mm for easy cleaning and roughness lower than 0,8 Ra.
Filtration stages consisting of G3 pre-filter with typical arrestance of 80 ≤ Am > 90 according to EN 779 fitted on stainless steel cell with quick release system (no screws needed to remove the panel) and low pressure drop H14 HEPA/ULPA filter according to CEN EN 1822.
Ventilation provided by energy efficiency low power consumption EBM Papst motorblower.
Dry battery UPS recovery pack with theoretical battery duration of 100 minutes starting from full charge status. UPS unit is provided with charge indicator (UPS must be plugged for recharging anytime in order to keep the always close to full charge status battery).
Pivoting castors with brakes.
Side and top windows made in stainless steel or 8 mm safety glass as per customer request.
Stainless steel internal shelves to lean trays (trays not included in standard package, total number of shelves depends on the internal useful height and may vary upon customer request).
Front and rear resin handle bars.
Frontal hinged or removable stainless steel panel with closing handle.
Backlit main switch.